duraflame® stix™ Multi-use Firestarters

Lighting wood and BBQ fires just got easier with duraflame stix firelighters.  Just split, stack and start.  Two stix firelighters stack like an “x” to start wood fires, and the wood fire lights within ten minutes. 

• Pack of 12 multi-use firestarters lights 6 wood fires or 12-24 BBQ fires
• Case of 48 multi-use firestarters lights 24 wood fires or 48-96 BBQ fires
• Resealable storage and take-along bag included in each 48 pack case
• Low VOC Emission Product

Start Something Good®, enter today!
 

Wood Fire

1. Break off two (2) stix™ firestarter sticks.
2. Place in an “X” configuration on the center of the fireplace grate.
3. Place a couple pieces of firewood around the firestarters. Light the ends of the
firestarters.
4. Once the fire is ignited, carefully add more wood as needed. Close fireplace screen.



BBQ Fire

1. Use ½ of a stix™ firestarter stick for each 2lbs of charcoal. Break off one (1) section from
the block of six. Break that piece in half. (Store the remaining firestarter pieces in a
reclosable bag for future use.)
2. Place the ½- piece on the bottom of the grill (under the charcoal grate).
(If the grill has a flat bottom, break off two small pieces from the ends of the ½-piece
and use them as supports under the larger piece to allow air flow under the starter
material.)
3. Replace the bottom grate and arrange charcoal briquets in a pile on the grate.
Light the starter through the grate with a utility lighter or long-stem match.
4. Begin cooking after the majority of the briquets have ashed over.